1. The operator should be familiar with and master the performance and characteristics of the gantry machining center machine. Ensure that the emergency stop switch can play a fast and effective role in the event of an emergency to avoid injury accidents.
2. Wear labor protection equipment according to regulations, and it is strictly forbidden to wear gloves to operate.
3. When the equipment is working, never touch the electronic switch with wet hands to avoid electric shock. Do not touch any moving parts with your hands.
4. Do not place tools or non-machined workpieces on gantry machining centers or moving objects.
5. The computer desk or work table next to the machine must be sturdy and must not be placed on moving parts.
6. When loading and unloading the workpiece, stop the machine first, and pay attention to keeping an appropriate distance between the workpiece and the tool. When the machine is running, do not open the front door and the left and right covers arbitrarily to avoid injury.
7. After the tool is set, please try to run it with DRY RUN to make sure that the program is correct.
8. When the power supply is powered off or emergency stop is shut down, the three axes should be restored to the mechanical position.
9. Do not remove the travel switch or any related parts of the protection switch without authorization.
10. Before finishing the work and leaving the machine, the control power switch of the operation panel and the main switch of the electrical box should be turned off.